碳纳米管可制作理想的防火涂层

Using an approach akin¹ to assembling a club sandwich at the nanoscale, National Institute of Standards and Technology (NIST) researchers have succeeded in crafting a uniform, multi-walled carbon-nanotube-based coating that greatly reduces the flammability（可燃性） of foam² commonly used in upholstered（装上软垫的） furniture and other soft furnishings. The flammability of the nanotube-coated polyurethane foam was reduced 35 percent compared with untreated foam. As important, the coating prevented melting and pooling of the foam, which generates additional flames that are a major contributor to the spread of fires.

 

Nationwide, fires in which upholstered furniture is the first item ignited account for about 6,700 home fires annually³ and result in 480 civilian⁴ deaths, or almost 20 percent of home fire deaths between 2006 and 2010, according to the National Fire Protection Association.

 

The innovative⁵ NIST technique squeezes nanotubes between two everyday polymers and stacks four of these trilayers on top of each other. The result is a plastic-like coating that is thinner than one-hundredth the diameter of human hair and has flame-inhibiting nanotubes distributed evenly throughout.

 

The brainchild of NIST materials scientists Yeon Seok Kim and Rick Davis, the fabrication method is described in the January 2014 issue of Thin Solid Films.* Kim and Davis write that the technique can be used with a variety of types of nanoparticles to improve the quality of surface coatings for diverse applications.

 

The pair experimented with a variety of layer-by-layer coating methods before arriving at their triple-decker approach. All had failed to meet their three key objectives: entire coverage⁶ of the foam's porous⁷（多孔的） surface, uniform distribution of the nanotubes, and the practicality of the method. Inmost of these trials, the nanotubes -- cylinders⁸ of carbon atoms resembling rolls of chicken wire -- did not adhere strongly to the foam surface.

 

So, Kim and Davis opted⁹ to doctor the nanotubes themselves, borrowing a technique often used in cell culture to make DNA¹⁰ molecules¹¹ stickier. The method attached nitrogen-containing molecules -- called amine groups -- to the nanotube exteriors¹².

 

This step proved critical: The doctored nanotubes were uniformly distributed and clung tenaciously¹³ to the polymer layers above and below. As a result, the coating fully¹⁴ exploits the nanotubes' rapid heat-dissipating capability¹⁵.

 

Gram for gram, the resulting coating confers much greater resistance to ignition and burning than achieved with the brominated flame retardants commonly used to treat soft furnishings today. As important, says Davis, a "protective char¹⁶ layer" forms when the nanotube-coated foam is exposed to extreme heat, creating a barrier that prevents the formation of melt pools.

 

"This kind of technology has the potential to reduce the fire threat associated with burning soft furniture in homes by about a third," Davis says.

分享到：